Fault code lookup
44 fault codes for the DQ200 (0AM) 7-speed DSG. Enter a code or a fault name to see whether the fault originates from the electronic control unit, the mechatronic unit, hydraulic pressure or the clutch, and what to do next.
- fault codes
- 44
- source groups
- 5
- ways to search: code and name
- 2
Type a code or a fault name; you can also paste the entire list from your tester. The tool shows the likely source and what to do next.
Results will appear here. Enter a code (P173200, P1732, 173200) or a fault name (pump, clutch, low voltage).
Codes by family
Codes by familyTap a code to open it in the tool and see its description.
Electronic control unit (TCU)
23 codesThe fault lies in the mechatronic unit’s electronic control unit, or in a sensor/valve circuit integrated into it.
Mechatronic (gear actuator / valve function)
12 codesA gear actuator, position sensor or valve function is not working as expected.
Hydraulic pressure (accumulator)
3 codesThe mechatronic unit cannot build up or hold the required hydraulic pressure.
Clutch-related
4 codesClutch wear or clearance is outside the limit values.
Possibly external / supply-related
2 codesAlthough the code is stored in the mechatronic unit, the cause may be external: battery, charging, wiring or the engine control unit signal.
The tool gives general guidance; a definitive diagnosis requires measurements, a test drive and an inspection by a competent workshop. Code descriptions are compiled from manufacturer technical publications, workshop experience and public diagnostic resources.